▷ With a door or the tailgate open. Dark areas in
the display indicate areas that are not detec‐
ted by the system.
▷ With the exterior mirrors folded in.
▷ When other camera functions are run in the
vehicle.
▷ If the vehicle is moving faster than at walking
speed.
▷ It may not be possible to use the function in
all countries.
▷ For reasons related to data protection, the
function can only be run three times in two
hours.
Crossing traffic warning
Principle
At blind exits or when leaving bay parking
spaces, the system detects other road users ap‐
proaching from the side earlier than is possible
from the driver's seat.
General
Two radar sensors in the rear bumper monitor
the area behind the vehicle.
The system indicates when other road users are
approaching.
Depending on the equipment, the area in front of
the vehicle is also monitored. For this purpose,
two further radar sensors are located in the front
bumper.
Safety note
WARNING
The system does not relieve you of your per‐
sonal responsibility to assess the visibility con‐
ditions and traffic situation correctly. There is a
risk of accident. Adapt your driving style to the
traffic conditions. Observe the traffic situation
and intervene actively if the situation warrants it.
Overview
Button in the vehicle
Park Assistant button
Sensors
The system is controlled using the following sen‐
sors:
▷ Side radar sensors, rear.
▷ Depending on the equipment: side radar sen‐
sors, front.
For further information:
Sensors of the vehicle, see page 47.
Seite 301
Driver Assistance Systems
CONTROLS
301
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
