System limits
The system limits of Surround View apply.
For further information:
Surround View, see page 293.
With Parking Assistant
Plus: Remote 3D View
Principle
With the corresponding equipment, the BMW
Connected app and the images from the Sur‐
round View cameras enable the vehicle sur‐
roundings to be displayed on a mobile device.
The function shows a view of the current situa‐
tion.
Sensors
The system is controlled using the following sen‐
sors:
▷ Front camera.
▷ Top view cameras.
▷ Rear-view camera.
For further information:
Sensors of the vehicle, see page 47.
Operating requirements
▷ Data transfer must be activated.
Data protection, see page 79.
▷ The BMW Connected App must be installed
on the mobile device.
▷ ConnectedDrive countries: a driver profile
with an existing ConnectedDrive account
must be activated.
Driver profiles, see page 80.
Switching the function on/off
Switching on/off with other
functions
1. "CAR"
2. "Settings"
3. "General settings"
4. "Data privacy"
5. Select the desired setting:
▷ "All services incl. analysis"
▷ "All vehicle services"
Switching on/off individually
Pre-adjustment
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Data privacy"
5. "Select services individually"
6. "Connected app and cust. portal"
7. "Remote 3D View"
Switching on/off
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Data privacy"
5. "Individual selection"
System limits of the sensors
For further information:
▷ Cameras, see page 47.
Functional limitations
The system may have limited functionality or
may not be available at all in the following situa‐
tions, for example:
Seite 300
CONTROLS
Driver Assistance Systems
300
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
