BMW 320e - Page 80

Driver profiles
Principle
Driver profiles can be created in order to store
personalised vehicle settings. If multiple drivers
use a vehicle, each driver can create a personal‐
ised driver profile. If a driver profile is selected,
the vehicle automatically adopts the settings
stored in the driver profile.
General
You can create three personal driver profiles.
There is also a guest profile available which can
be selected by any driver. The guest profile is ac‐
tive if no personal driver profile has been selec‐
ted.
Changes to the vehicle settings are saved auto‐
matically in the active driver profile or in the guest
profile.
The vehicle settings can be adjusted to the rele‐
vant driver as soon as the vehicle is unlocked. To
achieve this, recognition via a vehicle key and a
digital key and via a digital key must be assigned
to a driver profile.
ConnectedDrive countries: The settings saved in
the driver profile can be synchronised with the
personal BMW ConnectedDrive account. This
makes it possible to use these settings in other
BMW vehicles as well.
Operating requirements
If the driver profile is changed, the vehicle cannot
move at any more than walking speed.
Welcome screen
The welcome screen is shown once the Control
Display is switched on.
The following actions can be performed on the
welcome screen:
▷ Switch the driver profile.
▷ Start the setup assistant.
This option is offered for a limited time in new
vehicles.
As soon as the drive-ready state has been
switched on or any button is pressed, the wel‐
come screen disappears.
Setup assistant
The setup assistant is offered on the welcome
screen in new vehicles for a limited time in order
to define the key settings for the vehicle.
Select "Getting started" to start the setup assis‐
tant.
The setup assistant can be started at any time
using iDrive.
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Getting started"
The driver is guided through the following func‐
tions step by step:
▷ Set the system language.
▷ ConnectedDrive countries:
If the setup assistant has been called up in
the guest profile: create the driver profile.
▷ Register mobile devices with the vehicle.
▷ If the setup assistant has been called up from
a previously defined driver profile: set up the
Personal Assistant.
▷ Depending on whether the setup assistant
has been called up from a previously defined
driver profile or a guest profile: set up serv‐
ices or confirm the declaration regarding the
transfer of vehicle data.
▷ Set up other operating methods.
The selected settings are saved in the active
driver profile.
Guest profile
The guest profile can be activated by any driver.
Vehicle settings that are made when the guest
profile is active are saved in the guest profile.
Seite 80
CONTROLS
Personal settings
80
Online Edition for Part no. 01405A1EA53 - X/20