The guest profile is automatically active in the
following cases:
▷ No driver profiles have been created yet.
▷ No driver profile is assigned to the vehicle key
used to unlock the vehicle.
▷ No driver profile is assigned to the digital key
used to unlock the vehicle.
The following restrictions apply:
▷ The guest profile cannot be renamed.
▷ Recognition cannot be assigned to the guest
profile.
▷ It is not possible to assign a PIN to the guest
profile.
▷ ConnectedDrive countries: Synchronisation
with a ConnectedDrive account is not possi‐
ble.
The guest profile is selected on the welcome
screen or via iDrive:
1.
"CAR"
2. "Driver profiles"
As an alternative to steps 1 and 2, it is possi‐
ble to tap the profile picture in the upper sta‐
tus bar.
3. "Guest"
4. "OK"
Creating a driver profile
1.
"CAR"
2. "Driver profiles"
3. Tilt the Controller to the right.
As an alternative to steps 1 to 3, it is possible
to tap the profile picture in the upper status
bar.
4. "Add driver profile"
Non-ConnectedDrive countries: A name must be
entered for the driver profile.
ConnectedDrive countries: An existing Connec‐
tedDrive account must be assigned to a driver
profile. There are several possible ways of doing
this:
▷ "Log in"
The login details must be entered via iDrive.
▷ "New registration"
If the driver does not have a ConnectedDrive
account, one can be created via iDrive.
Selecting recognition
1. "CAR"
2. "Driver profiles"
3. Tilt the Controller to the right.
As an alternative to steps 1 to 3, it is possible
to tap the profile picture in the upper status
bar.
4. "Driver recognition"
5. Select the desired setting:
▷ "with vehicle key"
The vehicle key that is detected in the ve‐
hicle interior is assigned to the driver pro‐
file. If multiple vehicle keys are detected,
the unwanted vehicle keys must be re‐
moved from the vehicle interior.
▷ "With Digital Key"
The digital key that is detected in the ve‐
hicle interior is assigned to the driver pro‐
file. If multiple digital keys are detected,
the unwanted digital keys must be re‐
moved from the vehicle interior.
6. "Activate linkage"
As soon as the vehicle key or the digital key is
detected by the vehicle, the relevant driver profile
is activated. If the driver does not have the vehi‐
cle key or the smartphone with the digital key
with him/her, or if the vehicle key or digital key is
not detected, the driver profile can only be selec‐
ted on the welcome screen if PIN protection has
been set up.
Setting up PIN protection
A driver profile with recognition cannot be activa‐
ted without a vehicle key and without a digital
key. In this case, it is possible to set up PIN pro‐
Seite 81
Personal settings
CONTROLS
81
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
