EasyManua.ls Logo

BMW 320e - Page 299

BMW 320e
458 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Front camera.
Depending on the equipment: Reversing As‐
sist camera.
For further information:
Sensors of the vehicle, see page 47.
Display on the control display
Press the button with the engine running.
The image from the relevant camera is displayed,
depending on the driving direction:
"Front": image from the front camera.
"Rear": image from the rear camera.
Depending on the vehicle equipment, the cross‐
ing traffic warning can warn about approaching
vehicles by means of radar sensors.
For further information:
Crossing traffic warning, see page 301.
With navigation system:
activation points
Principle
Locations where Panorama View is to switch on
automatically can be saved as activation points
provided that a GPS signal is being received.
General
Up to ten activation points can be saved.
Activation points can be used for the front cam‐
era when driving forward.
Saving activation points
1.
Drive to the location at which the system is to
be switched on, and stop.
2.
Press the button.
3. Tilt the Controller to the right.
4. "Activation point"
The current location is shown.
5. "Save activation point"
Where possible, activation points are saved with
the town/city and street, otherwise with the GPS
coordinates.
Using activation points
Use of activation points can be switched on and
off.
1.
Press the button.
2. Tilt the Controller to the right.
3. "Settings"
4. "Panorama View, GPS-based"
5. "Panorama View is displayed automatically
when set activation points are reached."
Displaying activation points
1. Press the button.
2. Tilt the Controller to the right.
3. "Manage points"
A list of all activation points is shown.
Renaming or deleting activation
points
1. Press the button.
2. Tilt the Controller to the right.
3. "Manage points"
A list of all activation points is shown.
4. Select an activation point if necessary.
5. Perform the desired setting:
"Rename"
"Delete activation point"
"Delete all activation points"
Functional limitations
The functional limitations of Surround View ap‐
ply.
For further information:
Surround View, see page 293.
Seite 299
Driver Assistance Systems
CONTROLS
299
Online Edition for Part no. 01405A1EA53 - X/20

Related product manuals