Detection of objects
Very low obstacles and higher, protruding ob‐
jects such as ledges cannot be detected by the
system.
Some assistance functions also take account of
Park Distance Control PDC data.
Observe the notes in the chapter on Park Dis‐
tance Control PDC.
The objects shown in the Control Display may be
closer than they appear. Do not estimate the dis‐
tance to objects based on the display.
For further information:
Park Distance Control, PDC, see page 278.
Malfunction
The failure of a camera is shown on the Control
Display.
A yellow symbol is shown and the cap‐
ture area of the failed camera is shown in
black on the Control Display.
With Parking Assistant
Plus: Panorama View
Principle
The system provides you with an advance view
of crossing traffic at blind exits and junctions.
General
Road users hidden by obstacles at the side may
not be seen from the driver's seat until very late.
To provide a better view, the front and rear cam‐
eras scan the areas to the side for traffic.
Yellow lines on the screen image indicate the
front and rear ends of the vehicle.
The camera image is subject to varying levels of
distortion in some areas and is thus not suitable
for estimating distances.
Depending on the equipment, the function can
only be used when a forward gear is engaged.
For further information:
Surround View, see page 293.
Safety note
WARNING
The system does not relieve you of your per‐
sonal responsibility to assess the traffic situa‐
tion correctly. There is a risk of accident. Adapt
your driving style to the traffic conditions. Addi‐
tionally, look directly to check the traffic situa‐
tion and the area around the vehicle and inter‐
vene actively where appropriate.
Overview
Button in the vehicle
Panorama View
Sensors
The system is controlled using the following sen‐
sors:
Seite 298
CONTROLS
Driver Assistance Systems
298
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
