EasyManua.ls Logo

BMW 320e - Page 398

BMW 320e
458 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System limits
When frequently making short journeys or using
a sporty driving style, it may not be possible to
obtain a measured value. In this case, the meas‐
urement for the last, sufficiently long journey is
displayed.
Detailed measurement
Principle
The engine oil level is checked when the vehicle
is stationary and is shown on a scale.
If the engine oil level is outside its permissible
operating range, a Check Control message is
shown.
General
During measurement, the idle speed is increased
slightly.
Operating requirements
Vehicle is standing on level ground.
In drive-ready state.
Steptronic transmission: selector lever in se‐
lector lever position N or P and accelerator
pedal not pressed.
The internal combustion engine is at operat‐
ing temperature.
Carrying out a detailed measurement
1.
"CAR"
2. "Vehicle status"
3. "Engine oil level"
4. "Engine oil level measurement"
5. "Start measurement"
The engine oil level is checked and shown on a
scale.
Adding engine oil
General
Do not top up engine oil unless a message is dis‐
played in the instrument cluster. The top-up
amount is specified in the message on the Con‐
trol Display.
Only replenish with suitable types of engine oil.
Safely stop the vehicle and switch off drive-ready
state before topping up with engine oil.
Do not add too much engine oil.
Safety notes
WARNING
Service products, for example oils, greases,
coolants and fuels, can contain substances that
are harmful to health. There is a risk of injury or
even death. Please comply with the instructions
on the containers. Do not allow service prod‐
ucts to come into contact with clothing, skin or
eyes. Do not pour service products into other
bottles. Keep service products out of the reach
of children.
NOTE
Too little engine oil causes engine damage.
There is a risk of material damage. Top up with
engine oil immediately.
NOTE
Too much engine oil can damage the engine or
the catalytic converter. There is a risk of mate‐
rial damage. Do not add too much engine oil. If
there is too much engine oil, have the engine
oil level corrected by a Service Partner of the
manufacturer or another qualified Service Part‐
ner or a specialist workshop.
Seite 398
MOBILITY
Operating fluids
398
Online Edition for Part no. 01405A1EA53 - X/20

Related product manuals