BMW 320e - Page 399

Overview
The oil filler neck is in the engine compartment.
For further information:
Overview, see page 393.
Adding engine oil
1. Open bonnet.
Opening, see page 394.
2. Turn the cap anticlockwise to open.
3. Add engine oil.
4. Tighten cap.
Engine oil grades for topping up
General
Engine oil quality is a critical factor in the service
life of the engine.
Only replenish with the types of engine oil that
are listed.
Some engine oil grades may not be available in
all countries.
Safety notes
NOTE
Oil additives can damage the engine. There is a
risk of material damage. Do not use oil addi‐
tives.
NOTE
Using the wrong engine oil can result in engine
malfunctions and damage. There is a risk of
material damage. When selecting the engine
oil, make sure that it is the correct specification.
Suitable engine oil grades
Engine oils with the following oil specifications
can be used.
Oil specification
BMW Longlife-04.
BMW Longlife-12 FE.
BMW Longlife-17 FE+.
Alternative engine oil grades
If suitable engine oils are not available, up to 1 li‐
tre, 2 pints, of an engine oil with the following oil
specification can be used for topping up:
Oil specification
ACEA C2.
ACEA C3.
Viscosity classes
When selecting an engine oil, make sure that the
engine oil belongs to one of the following viscos‐
ity classes:
Viscosity classes
SAE 0W-20.
SAE 5W-20.
SAE 0W-30.
SAE 5W-30.
SAE 0W-40.
SAE 5W-40.
Seite 399
Operating fluids
MOBILITY
399
Online Edition for Part no. 01405A1EA53 - X/20