Technical data:
Operation and display
The BMW motorcycle charger is a high quality, microprocessor-controlled charging and trickle
charging device for 12V BMW motorcycle batteries. In this way, BMW motorcycle wet and
maintenance-free lead acid batteries (gel or AGM) – with capacities between 6 – 25 Ah can be
charged using the BMW on-board socket or with a suitable charging adapter directly to the battery
poles. The charger is suitable for BMW motorcycles with CAN Bus technology, functions completely
automatically and follows the charging characteristic stored in the microprocessor. The device can
remain connected to the battery or the vehicle over longer time periods. Charging cycles are carried
out; the battery is monitored and if necessary, recharged. The device is built into a stable plastic
housing. On the front, there is a membrane keyboard for setting the device. The following display
languages can be selected: - German – English – French – Spanish – Italian- Portuguese.
Connecting to the mains: If the charger is connected to the mains, the device identification appears
and 3 LEDs light up for 2 seconds. The charger is now operational.
Set language: Press the F1 key for approx. 1 second. The language menu appears. In the centre of the
display, the selected language is displayed. Move left and right to select language options. The
chosen language must be confirmed with the OK key. Proceed the same way for the other available
languages. Note: The language menu can only be called up as long as the device is not charging or
not connected to the battery or vehicle. In charging mode, the menu is not available.
To Next Page
Loading...
Need help?
General
