Need help?Do you have a question about the BMW MINI Wallbox Plus and is the answer not in the manual?
General| Brand | BMW |
|---|---|
| Model | MINI Wallbox Plus |
| Category | Battery Charger |
| Language | English |
Provides critical safety guidelines for installation, operation, and maintenance to prevent injury or damage.
Details requirements for circuit breakers, supply cables, and mains isolation devices for safe electrical connection.
Explains how to use DIP switches (DSW1.6-DSW1.8) to set the maximum charge current for the Wallbox.
Lists prerequisites, tools, and acclimatization procedures necessary before beginning the Wallbox installation.
Provides comprehensive instructions for physically mounting the Wallbox to various surfaces using the correct procedures and hardware.
Covers initial steps for mounting, including drawing drill holes using a template and spirit level.
Describes the final steps of mounting the Wallbox using wafer-head screws and ensuring correct cable routing.
Illustrates the internal wiring and terminal layout of the Wallbox, identifying connectors and components.
Provides detailed instructions for cutting, stripping, and connecting the supply cable, including single-phase options.
Explains the correct procedure for opening and using the spring-type supply terminals for wire connection.
Describes the RS485 connection [X2] for communication with smart meters, including wiring and shielding recommendations.
Details the Ethernet1 connection [X4], including wiring standards (TIA-568A/B) and color coding for 100BaseT.
Outlines the overall steps for commissioning the Wallbox, including cleaning, checks, and final assembly.
Explains how to use commissioning mode for system tests, including activation and deactivation steps.
Details the mandatory safety tests required before initial use, referencing relevant national regulations and standards.
Lists electrical data like socket type, protection class, IP rating, and mechanical data like weight and assembly type.
Details the procedure for safely replacing the fuse (F1) in the Wallbox, including necessary safety precautions.
To Next Page
