Intended use
The Wallbox is a charging station for indoor and outdoor use for charging electric or
plug-in hybrid vehicles. Do not connect any other devices such as electric tools. The Wallbox is
designed for installation on a wall or a column. Comply with the relevant national regulations for
installing and connecting the Wallbox.
The intended use of the device in every case includes compliance with the ambient conditions for
which this device was developed.
The Wallbox was developed, manufactured, tested and documented on the basis of the relevant safety
standards. If you comply with the instructions and safety information described for its intended use, the
product will not normally pose any danger in terms of property damage or to the health of people.
This device must be earthed. In the event of an error, the earth connection will reduce the danger of an
electric shock.
The instructions contained in this manual must be followed to the letter. Otherwise, sources of danger
may be created or safety equipment may be rendered ineffective. In addition to the safety information
provided in this manual, the safety and accident prevention regulations relating to the specific device
must be followed.
As a result of technical or statutory restrictions, not all versions/options are available in all countries.
About this manual
This manual and the functions described in it are valid for devices of the following type:
MINI Wallbox Plus
This manual is designed exclusively for trained personnel. These are people who, as a result of their
training, skills and experience and their knowledge of the relevant standards, can assess the work
assigned to them and identify possible dangers.
The illustrations and explanations contained in this manual refer to a typical version of the device. Your
device version may differ from this.
The information and instructions for operating the device are provided in the operating instructions.
EN
11
To Next Page
Loading...
