6
E88 Complete Vehicle
The 1 Series Convertible is a four-seater vehicle with a fully automatic fabric convertible top
The 128i is powered by the N51B30M0 SULEV engine or the N52B30O1, 230 horse-
power inline 6-cylinder 3.0-liter engine that generates 200 lb-ft of torque; the 128i will
feature Valvetronic, VANOS and aluminum/magnesium block construction. The 128i can
be visually identified by the two oval tail pipes with chrome tips at the lower left of the rear
bumper.
The 135i features the N54B30U0 twin-turbocharged direct injection 3.0-liter inline six-
cylinder engine that produces 300 horsepower and 300 lb-ft of torque from as low as
1,400 rpm. The 135i can be visually identified by the two 80 mm diameter tail pipes with
chrome tips as standard equipment along with the M aerodynamic package.
Conforming to BMW’s Efficient Dynamics, these vehicles will include the following:
• Light weight but rigid bodyshell.
• Lightweight suspension components:
example: hollow anti-roll bars and aluminum front axle.
• Run Flat Tires as standard equipment.
To Next Page
Loading...
