EasyManua.ls Logo

BMW HP2 ENDURO - Ignition Switch and Steering Lock

BMW HP2 ENDURO
139 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ignition switch and
steering lock
Keys
You receive one master key
and one spare key, plus a
key for removing the seat.
Please consult the informa-
tion on the electronic immob-
iliser (EWS) if a key is lost or
mislaid ( 29).
Ignition switch and steer-
ing lock, seat lock and
tank filler cap lock are all op-
erated with the same key.
Switching on the ignition
Turn the key to position 1.
Side lights and all function
circuits switched on.
Engine can be started.
Pre-ride check is
performed. ( 59)
Switching off the ignition
Turn the key to position 2.
Lights switched off.
Handlebars not locked.
Key can be removed.
Electrically powered ac-
cessories remain opera-
tional for a limited period
of time.
The battery can be
recharged via the on-board
socket.
4
28
z
Operation

Table of Contents