Need help?Do you have a question about the BMW HP4 and is the answer not in the manual?
General| Displacement | 999 cc |
|---|---|
| Torque | 112 Nm at 9, 750 rpm |
| Transmission | 6-speed |
| Seat Height | 820 mm |
| Fuel Tank Capacity | 17.5 liters |
| Dry Weight | 169 kg |
| Suspension | Dynamic Damping Control (DDC) |
| Engine Type | Water-cooled 4-cylinder 4-stroke in-line engine |
| Power | 193 hp at 13, 000 rpm |
| Front Suspension | Upside-down telescopic fork |
| Rear Suspension | Aluminum swing arm |
| Front Brakes | Twin disc brakes |
| Rear Brakes | Single disc brake |
| Frame | Aluminum composite bridge frame |
| Tires | Front: 120/70 ZR 17, Rear: 200/55 ZR 17 |
| Weight | 199 kg (wet) |
Identifies and explains the gauges and indicators on the motorcycle's dashboard.
Explains the function of different warning and indicator lights.
Describes the ABS Pro system indicator and its availability.
Explains how the display shows when the next service is due.
Provides an overview of warning messages and their meanings.
Instructions for switching ignition on/off and locking the handlebars.
Explains the function of the electronic immobiliser system and its key recognition.
Essential safety advice for riders, including recommended clothing and loading.
Step-by-step guide for starting the engine and the Pre-Ride-Check procedure.
How to use the LAPTIMER for recording lap times and related data.
How to set and adapt the Traction Control system for different riding conditions.
How to adjust the Dynamic Damping Control settings for suspension.
Instructions for using Launch Control for optimal race starts.
Explains how the Race ABS system works and interacts with braking.
Details the DTC system's function in managing engine torque and wheel slip.
Explains the DDC system for electronically adjusting suspension damping.
Guidance on checking the function and thickness of brake pads and fluid levels.
Technical specifications related to the motorcycle's engine design and performance.
Technical specifications for the front and rear brake systems, including pad material.
To Next Page
