To do so, press retainer 2 and
pull the cap up.
Install coding plug and secure
plug connection with a new
cable tie.
Switch on the ignition.
When the coding plug is inserted,
RAIN mode 1 is activated auto-
matically for safety reasons.
Setting riding mode ( 45).
Installing front seat ( 57).
Clutch
with Competition Kit
OE
Adjusting clutch lever
Attempting to adjust the
clutch lever while riding the
motorcycle can lead to accidents.
Do not attempt to adjust the
clutch lever unless the motor-
cycle is at a standstill.
Turn adjusting screw 1 in dir-
ection A to increase the dis-
tance between handlebar grip
and clutch lever.
Turn adjusting screw 1 in dir-
ection B to decrease the dis-
tance between handlebar grip
and clutch lever.
The adjusting screw is
easier to turn if you push
the clutch lever forward.
4
48
z
Operation
To Next Page
Loading...
