BMW HP4 User Manual

The helmet catch can
scratch the panelling.
Make sure the lock is out of the
way when you hook the helmet
into position.
Use a plastic-sheathed steel
cable to secure the helmet to
helmet holder 1.
Installing rear seat cover
( 55).
Place the helmet on the front
seat.
with Passenger Bundle
OE
Removing rear seat ( 56).
Turn the rear seat upside
down.
The helmet catch can
scratch the panelling.
Make sure the lock is out of the
way when you hook the helmet
into position.
Use a plastic-sheathed steel
cable to secure the helmet to
helmet holder 1.
Installing rear seat ( 56).
Place the helmet on the front
seat.
Luggage loops
with Passenger Bundle
OE
Securing luggage to
motorcycle
Removing rear seat ( 56).
Turn the rear seat upside
down.
Pull luggage loops 1 out of the
holders and to the outside and
down.
Installing rear seat ( 56).
4
58
z Operation

BMW HP4 Specifications

General

Displacement	999 cc
Torque	112 Nm at 9, 750 rpm
Transmission	6-speed
Seat Height	820 mm
Fuel Tank Capacity	17.5 liters
Dry Weight	169 kg
Suspension	Dynamic Damping Control (DDC)
Engine Type	Water-cooled 4-cylinder 4-stroke in-line engine
Power	193 hp at 13, 000 rpm
Front Suspension	Upside-down telescopic fork
Rear Suspension	Aluminum swing arm
Front Brakes	Twin disc brakes
Rear Brakes	Single disc brake
Frame	Aluminum composite bridge frame
Tires	Front: 120/70 ZR 17, Rear: 200/55 ZR 17
Weight	199 kg (wet)