Repeatedly short-press SET 2
until SETUP EQUIPMENT
ENTER 4 appears on the
display.
If you scroll down too far,
short-press TRIP 1 to scroll
back up.
Long-press SET 2 to open the
menu.
The DWA AUTO parameter 5
and its current value 6 appear
on the display.
Long-press SET 2 to change
the value of setting 6.
Value 6 flashes.
Short-press TRIP 1 or SET 2
to change the value.
The following settings are avail-
able:
DWA AUTO ON: the DWA
anti-theft alarm is active and
will be armed automatically
when the ignition is switched
off.
DWA AUTO OFF: the DWA
anti-theft alarm is deactivated.
Long-press SET 2 to save the
new value.
Value 6 stops flashing.
This completes the process.
Long-press TRIP 1 to abort the
procedure.
Adjustment aborted.
Clock
Setting the clock
Attempting to set the clock
while riding the motorcycle
can lead to accidents.
Set the clock only when the mo-
torcycle is stationary.
Switch on the ignition.
4
37
z
Operation
To Next Page
Loading...
