BMW HP4 - Removing and Installing Number; Number-Plate Carrier; Plate Carrier

Removing and installing
number-plate carrier
Removing number-plate
carrier
Switch off the ignition.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
with anti-theft alarm (DWA)
OE
If applicable, deactivate the
anti-theft alarm.
with Passenger Bundle
OE
Removing rear seat ( 56).
Open cable tie 1 (can be re-
used).
Open retainer 2 and discon-
nect the plug.
with anti-theft alarm (DWA)
OE
Open retainers 3 and discon-
nect the plug.
Remove screw 4.
Work the anti-theft alarm for-
ward out of the holder.
6
107
z On the race track