Remove the valve cap
from Air Damping System
valve 1.
Pull tube 2 out of the handle
of the pump and pivot it for-
ward.
Turn hose 2 counter-
clockwise to back it as far
as possible out of threaded
adapter 3.
Connect threaded adapter 3
to valve 4, allowing the
pump to turn with the
adapter.
The pneumatic pump now
has an airtight connection
to the valve.
Turn hose 2 clockwise to
screw it as far as possible
into threaded adapter 3.
The valve is now open.
Pressurise the Air Damping
System as per the guideline
values below.
One-up
6.5 bar (Person weighing
80 kg)
One-up
7.5 bar (Person weighing
100 kg)
4
47
z
Operation
To Next Page
