BMW K 1600 GT User Manual

Pull the release lever all the
way up and open the lid of the
topcase.
Closing the Topcase
with topcase
OA
Pull release lever 2 all the way
up.
Close Topcase lid and hold
it down. Ensure that no lug-
gage is trapped between lid
and case.
The topcase can also be
locked if the lock is in the
LOCK position. Under such cir-
cumstances, ensure that the igni-
tion key is not in the topcase.
Push release lever 2 down,
continuing until it engages.
Turn key in Topcase lock into
LOCK position then extract it.
Removing passenger seat
Switch off ignition.
Remove rider's seat ( 68).
Remove screws 1.
Pull the rear seat slightly for-
ward and lift the seat slightly.
Disconnect plug 2 of the seat
heating and remove the rear
seat.
Lay the seat on the cover side
on a clean surface.
7
117
z Accessories

BMW K 1600 GT Specifications

General

Fuel System	Electronic fuel injection
Displacement	1, 649 cc
Fuel Capacity	26.5 liters
Seat Height	810 mm
Curb Weight	343 kg
Front Suspension	Duolever
Rear Suspension	Paralever
Front Brakes	Double disc brakes, diameter 320 mm, 4-piston fixed calipers
Rear Brakes	Single disc brake, diameter 320 mm, 2-piston floating caliper
ABS	BMW Motorrad Integral ABS (partly integral)
Wheelbase	1618 mm
Transmission	6-speed, helical gear transmission