BMW Komfort - User Manual

Need help?

Do you have a question about the BMW Komfort and is the answer not in the manual?

Summary

To Fit the Ski Rack

Insert Ski Rack into Roof Rack Section

Push the ski rack into the roof rack section after opening the sealing flap.

Secure Ski Rack

Push ski rack outwards, secure with Phillips screw, ensuring it cannot slide.

To Operate the Ski Rack

Open Ski Rack

Open the ski rack by pulling the locking piece, potentially after unlocking.

Load and Close Ski Rack

Place skis with tips rearward, close rack until locking piece clicks, then lock.

Summary

To Fit the Ski Rack

Insert Ski Rack into Roof Rack Section

Push the ski rack into the roof rack section after opening the sealing flap.

Secure Ski Rack

Push ski rack outwards, secure with Phillips screw, ensuring it cannot slide.

To Operate the Ski Rack

Open Ski Rack

Open the ski rack by pulling the locking piece, potentially after unlocking.

Load and Close Ski Rack

Place skis with tips rearward, close rack until locking piece clicks, then lock.

This document provides installation instructions for the BMW "Komfort" ski rack, a genuine accessory designed to transport skis on a vehicle's roof. The manual emphasizes correct fitting and operation to ensure no damage to the vehicle and to maintain warranty rights.

Function Description:

The "Komfort" ski rack is designed to securely transport skis on the roof of a BMW vehicle. It integrates with the existing roof rack system. The rack allows for the transport of a maximum of three or six pairs of skis, depending on the specific parts kit. Skis are to be placed with their tips pointing to the rear of the vehicle. The loading process should start from the middle of the vehicle and work outwards, with unloading performed in the reverse order. The rack features a locking mechanism to secure the skis and prevent unauthorized removal.

Important Technical Specifications:

Part Number: 01 29 9 410 725
Publication Date: IX/97 (September 1997)
Manufacturer: BMW
Compatibility: Designed for use with BMW roof rack sections.
Capacity: Maximum of three or six pairs of skis (depending on the specific parts kit).
Components: The parts kit typically includes two or four ski racks (a), two keys (b), and one set of installation instructions (c).

Usage Features:

Installation:
1. Open the sealing flap (1) on the roof rack section (2).
2. Push the ski rack (a) into the roof rack section (2) as shown in Figure 2.
3. Close the sealing flap (1) on the roof rack section (2).
4. Open the ski rack (a) by pulling the locking piece (3) in the direction indicated by the arrow. This may require opening the lock (4) first by ensuring the keyhole is vertical (Figure 3).
5. Push the ski rack (a) towards the outside until it is flush against the sealing flap.
6. Secure the ski rack with a Phillips screw (1) (Figure 4).
7. Safety Check: After securing, it must be impossible to slide the ski rack within the roof rack section.
Operation (Loading Skis):
1. Open the ski rack (a) by pulling the locking piece (3) in the direction indicated by the arrow. This may require opening the lock (4) first (keyhole vertical) (Figure 5).
2. Place the skis (1) into the ski rack (a) with the tips pointing to the rear (Figure 6).
3. Close the ski rack (a) until the locking piece (2) audibly clicks into position.
4. Check that the locking piece (2) has engaged.
5. Close the lock (4) by ensuring the keyhole is horizontal.
6. Safety Precaution: Never drive the vehicle with the ski rack open, as this may cause an accident. Always lock the ski rack as a safety precaution.
General Usage Guidelines:
- Skis should be transported with their tips pointing to the rear.
- Loading should commence from the middle of the vehicle and proceed outwards.
- Unloading should be performed in the reverse order.
- Do not drive through a car wash with the ski rack fitted.

Maintenance Features:

Lock Care: Treat the locks with a lock care product at regular intervals to ensure smooth operation and longevity.
Protection: Always place the cover caps on the locks to protect them from dirt and ice, which can impede functionality.
Tools: A Phillips screwdriver from the vehicle's tool kit is required for installation.