BMW F30 User Manual

BMW 3-Serie Limousine F30 03/14 >>
BMW 3-Serie Touring F31 03/14 >>
BMW 3-Serie Gran Turismo F34 03/14 >>
750061
Installation instructions
Reference:
The following information must be reviewed before beginning the assembly:
The installation instructions are to be thoroughly read.
The installation should be carried out by qualified personnel with the relevant technical knowledge.
The vehicle manufacturers' current technical notices and information on retrofitting must be followed.
The removal and replacement instructions found in the current repair manuals must be followed.
It must be ensured that the vehicle is technically suitable for the installation of a trailer hitch.
For the fitment instructions for other
models covered by this part go to http://
www.erich-jaeger.co.nz/Solutions/
Solutions-BMW.html
or
Scan this QR code

BMW F30 Specifications

General

Production Years	2011-2019
Body Styles	Sedan, Touring
Engine Options	Petrol: 1.6L, 2.0L, 3.0L; Diesel: 2.0L, 3.0L
Drive Wheels	Rear-wheel drive, All-wheel drive (xDrive)
Material	Varies by accessory (e.g., plastic, metal, leather)
Installation	Varies by accessory (e.g., DIY, professional installation required)

Summary

Installation Overview and Reference

General Installation Prerequisites

Essential prerequisites and safety notes before assembly.

Kit Contents and Required Tools

Identification of Kit Components

Lists and identifies all parts included in the installation kit.

Tools Required for Installation

Lists the necessary tools for performing the installation procedure.

Model Compatibility Overview

Supported Vehicle Models

Overview of supported BMW models (F30, F31, F34) and associated page references.

Vehicle Preparation Steps

Pre-installation Vehicle Setup

Steps for preparing the vehicle, including keyless-go and battery safety.

Wiring Harness Routing

Routing Harness Options

Guides on routing the wiring harness according to different vehicle configurations.

F30 Model: Interior Removal

F30 Rear Trim Disassembly

Detailed steps for removing rear seat and trim panels for the F30 model.

F30 Model: Drilling and Wiring Prep

F30 Drilling and Wire Preparation

Instructions for drilling holes and preparing wires for connection on F30.

F30 Model: Electrical Connections (Part 1)

F30 Module C Connection

Steps to connect electrical module C to the F30 vehicle's wiring harness.

F30 Module D Connection

Steps to connect electrical module D to the F30 vehicle's wiring harness.

F30 Model: Electrical Connections (Part 2)

F30 Module E Connection

Steps to connect electrical module E to the F30 vehicle's wiring harness.

F30 Module F Connection

Steps to connect electrical module F to the F30 vehicle's wiring harness.

F31 Model: Interior Removal

F31 Rear Trim Disassembly

Detailed steps for removing rear seat and trim panels for the F31 model.

F31 Model: Drilling and Wiring Prep

F31 Drilling and Wire Preparation

Instructions for drilling holes and preparing wires for connection on F31.

F31 Model: Electrical Connections (Part 1)

F31 Module C Connection

Steps to connect electrical module C to the F31 vehicle's wiring harness.

F31 Module D Connection

Steps to connect electrical module D to the F31 vehicle's wiring harness.

F31 Model: Electrical Connections (Part 2)

F31 Module E Connection

Steps to connect electrical module E to the F31 vehicle's wiring harness.

F31 Module F Connection

Steps to connect electrical module F to the F31 vehicle's wiring harness.

F34 Model: Interior Removal

F34 Rear Trim Disassembly

Detailed steps for removing rear seat and trim panels for the F34 model.

F34 Model: Drilling and Wiring Prep

F34 Drilling and Wire Preparation

Instructions for drilling holes and preparing wires for connection on F34.

F34 Model: Electrical Connections (Part 1)

F34 Module C Connection

Steps to connect electrical module C to the F34 vehicle's wiring harness.

F34 Module D Connection

Steps to connect electrical module D to the F34 vehicle's wiring harness.

F34 Model: Electrical Connections (Part 2)

F34 Module E Connection

Steps to connect electrical module E to the F34 vehicle's wiring harness.

F34 Module F Connection

Steps to connect electrical module F to the F34 vehicle's wiring harness.

CAN-Wire Connection Options

CAN-Wire Options A and B

Instructions for connecting the CAN-Wire based on chosen option.

CAN-Wire Option A Implementation

Connecting CAN-Wire (Option A)

Detailed steps for connecting the CAN-Wire using Option A.

CAN-Wire Option B Implementation

Connecting CAN-Wire (Option B)

Detailed steps for connecting the CAN-Wire using Option B.

Fuse Box Connections Overview

Fuse Box Options (1 & 2)

Overview of fuse box connection options for vehicle models.

Fuse Box Option 1 Procedure

Connecting G to Fuse Box (Opt 1)

Steps to connect component G to the fuse box for Option 1.

Connecting I to Fuse Box (Opt 1)

Steps to connect component I to the fuse box for Option 1.

Fuse Box Option 2 Procedure

Connecting I & G to Fuse Box (Opt 2)

Steps to connect components I and G to the fuse box for Option 2.

Final Wiring Connections

Connecting Module A

Steps to connect the main module A to the vehicle's wiring harness.

Tow Hitch Module Connection

Connecting the Tow Hitch Module

Instructions for physically connecting the tow hitch module and its wiring.

Wire Color Coding Reference

Table explaining the color coding for various wires used in the installation.

Optional Trailer Brake Prep & Battery Safety

Trailer Brake Preparation (Optional)

Steps for optional trailer brake system preparation.

Battery Disconnection and Reconnection

Safety procedures for disconnecting and reconnecting the vehicle battery.

Post-Installation Functional Checks

Checking Lighting Functions

Verifying all vehicle lighting functions after installation.

Checking Bulb Out Detection

Verifying the bulb out detection system's functionality.

Service and Diagnostics

Vehicle Service and Diagnostics

Information related to vehicle service and diagnostic procedures.

PDC System Check

Parking Distance Control (PDC) Check

Procedures to check and configure the PDC system after installation.

Module Coding Procedure

Coding the Trailer Module

Steps for coding the trailer module using BMW Service ISTA/P.