Underbody, incl. all visible parts (i.e., transmission,
rear axle, fuel lines, exhaust system): Check for
damage, leaks and corrosion.
Steering components: Check for clearance, damage
and wear.
MINI Mobility System: Check expiration date on
sealant bottle. Change sealant bottle if necessary.
Final Inspection: Road test with check of:
– Brakes
– Steering
– Shock absorbers (visual)
– Transmission
MINI Cooper S E Countryman ALL4 (PHEV):
Check coolant level and concentration in both
reservoirs (for gasoline engine and electric motor
electronics).
Check the occasional use charging cable for
damage (cuts, breakage, deformation), corrosion
and wear.
Check the charging cable port for damage,
corrosion and wear.
BRAKE FLUID
Maintenance work:
Replace brake fluid (as shown in CBS).
FRONT BRAKE
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness; replace
as necessary.
REAR BRAKE
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness; replace
as necessary.
Parking brake: Repair or replace parking brake
shoes/linings only if a reduction in the brake’s
effectiveness is noted.
EMISSION CONTROL MAINTENANCE
SCHEDULE
The maintenance schedule as shown is designed to
maintain the proper function of the vehicle’s
emission control systems. This will help ensure
optimum performance and fuel economy.
Basic Engine
Engine oil As specified by CBS
Engine oil filter As specified by CBS
Fuel System
Air filter At every 4th Engine Oil
Service (approximately
40,000 miles)
Ignition System
Spark plugs (all models) At every 6th Engine Oil
Service (approximately
60,000 miles)
Emission Control
Components — Oxygen
Sensor
Cooper Clubman ALL4, 120,000 miles
Countryman, Countryman
ALL4
Cooper S E Countryman 120,000 miles
ALL4
JCW 150,000 miles
Cooper S 150,000 miles
Cooper Hardtop 2 Door, 150,000 miles
Hardtop 4 Door,
Convertible, Clubman
6
To Next Page
Loading...
