BMW R 1200 C User Manual

11.34
Renewing radial shaft seal in alternator
mount cover
•
Carefully lever radial shaft seal out, using a
screwdriver.
•
Drive in the new radial shaft seal with drift and
sliding sleeve, BMW No. 11 5 680.
L Note:
Slide new radial shaft seal over taper on sliding
sleeve, pre-shape and pull off.
Renewing radial shaft seal for rotary
breather
•
Carefully lever radial shaft seal out, using a
screwdriver.
•
Carefully pre-form the lip of the radial shaft seal
by hand.
•
Oil the new radial shaft seal lightly and drive it in
with handle, BMW No. 00 5 550, and drift,
BMW No. 11 5 650.
11 5 680
RS110240
00 5 550
RS110241
11 5 650

BMW R 1200 C Specifications

General

Displacement	1170 cc
Bore x Stroke	101 mm x 73 mm
Transmission	5-speed
Final Drive	Shaft drive
Rear Suspension	Monoshock
Seat Height	740 mm
Engine Type	Air-cooled, 2-cylinder, 4-stroke boxer engine, one camshaft, four valves per cylinder
Power	61 hp @ 5, 000 rpm
Torque	98 Nm @ 3, 000 rpm
Front Suspension	Telescopic fork
Rear Brakes	Single disc, diameter 285 mm, 2-piston caliper
Fuel Capacity	17 liters
Wheelbase	1650 mm