to remove them from the bulb
housing.
Press bulb 4 into its socket
and turn it counter-clockwise to
remove.
Replace the defective bulb.
Bulb for tail light/brake
light
P21W / 12 V / 21 W
Bulbs for flashing turn
indicators, rear
PY21W / 12 V / 21 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
Press bulb 4 into its socket
and turn it clockwise to install.
Insert the bulb holder removed
beforehand into the bulb hous-
ing and turn the bulb holder
clockwise to latch it in position.
Engage the bulb housing at
position 5.
Install screws 1 on left and
right.
8
114
z
Maintenance
ProCarManuals.com
To Next Page
Loading...
Need help?
General
