BMW R 1200GS User Manual

Press button 1 to increase the
flashing value or button 2 to
reduce the same.
Keep button 2 pressed un-
til the minutes in the bottom
display line 3 start to flash.
Press button 1 to increase the
flashing value or button 2 to
reduce the same.
Keep button 2 pressed until
the minutes no longer flash.
Setting is complete.
In order to cancel the setting
at any point, keep button 1
pressed until the initial value
is shown again.
NOTICE
If you drive off before the setting
has been completed, the setting
will be cancelled.
Setting the date
Switching on ignition ( 50).
In the SETUP menu, select
the menu item SETUP
DATE.
Keep button 2 pressed until
the day in the bottom display
line 3 starts to flash.
NOTICE
If "––.––.––" is displayed
instead of the date, the voltage
supply of the instrument cluster
has been interrupted (e.g. by dis-
connecting the battery).
Press button 1 to increase the
flashing value or button 2 to
reduce the same.
Keep button 2 pressed un-
til the month in the bottom
display line 3 starts to flash.
Press button 1 to increase the
flashing value or button 2 to
reduce the same.
Keep button 2 pressed until
the year in the bottom display
line 3 starts to flash.
Press button 1 to increase the
flashing value or button 2 to
reduce the same.
Keep button 2 pressed until
the year no longer flashes.
Setting is complete.
In order to cancel the setting
at any point, keep button 1
pressed until the initial value
is shown again.
4
65
z Operation

BMW R 1200GS Specifications

General

Final Drive	Shaft drive
Displacement	1170 cc
Power	92 kW (125 hp) at 7, 750 rpm
Torque	125 Nm at 6, 500 rpm
Fuel Capacity	Approx. 20 l
Seat Height	850 / 870 mm
Front Brake	Dual 305 mm discs, 4-piston calipers
ABS	Standard
Wheelbase	1, 507 mm
Transmission	Constant mesh 6-speed gearbox with helical gear teeth
Rear Suspension	Paralever, WAD strut (travel-related damping), spring pre-load hydraulically adjustable (continuously variable) at handwheel, rebound damping adjustable