BMW R 1200RT 2015 User Manual

Muffler
Swing muffler outward
CAUTION
Hot exhaust system.
Burn hazard
Do not touch hot exhaust
system.
Make sure ground is level and
firm and park motorcycle on its
center stand.
Allow the muffler to cool down.
Remove screws 1 at front with
washer 2.
Take off muffler cover 3.
Loosen screw 1 of clip.
Remove screw 2 and mounting
plate 3.
Turn muffler 4 outward clock-
wise.
Mounting muffler
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque.
Damage or loosening of screwed
connections.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Turn muffler 1 counterclock-
wise until it rests on passenger
footpeg bracket.
Install washer 2 and screw 3.
Muffler on footpeg
bracket
14 lb/ft (19 Nm)
7
133
z Maintenance
ProCarManuals.com

BMW R 1200RT 2015 Specifications

General

Displacement	1170 cc
Torque	125 Nm at 6, 500 rpm
Curb Weight	274 kg
Fuel System	Electronic fuel injection
Cooling System	Air/liquid-cooled
Final Drive	Shaft drive
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
ABS	Standard
Power	125 hp at 7, 750 rpm
Transmission	6-speed
Fuel Capacity	25 liters
Seat Height	805/825 mm (adjustable)
Front Suspension	Telelever fork
Rear Suspension	Paralever swingarm
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	Single 276 mm disc, 2-piston caliper
Engine Type	Air/liquid-cooled, four-stroke, flat twin