BMW S 1000R 2018 User Manual

Remove screw 1 and take
wheel speed sensor out of
bore.
Mask off areas of wheel rim
that could be scratched in the
process of removing the brake
calipers.
ATTENTION
Unintentional pressing to-
gether of brake pads
Component damage when
mounting the brake caliper or
when pressing the brake pads
apart
Do not actuate the brakes with
the brake caliper removed.
Remove screws 1 of brake
calipers on left and right.
Push brake pads 1 slightly
apart by turning the brake
caliper 2 back and forth against
the brake rotor 3.
Carefully pull brake calipers
back and outward to remove
them from brake rotors.
Raise motorcycle, preferably
with a BMW Motorrad rear-
wheel stand.
Mounting rear-wheel stand
( 134).
Raise front of motorcy-
cle, preferably using a
BMW Motorrad front wheel
9
144
z Maintenance

BMW S 1000R 2018 Specifications

General

Torque	114 Nm at 9, 250 rpm
ABS	Standard
Traction Control	Standard
Power	165 hp (121 kW) at 11, 000 rpm
Transmission	6-speed constant mesh
Rear Suspension	Aluminum swing arm, adjustable compression and rebound damping
Front Brake	Dual 320mm discs, 4-piston calipers
Rear Brake	Single disc brake, diameter 220 mm, single-piston floating caliper
Seat Height	814 mm
Fuel Capacity	17.5 liters
Weight	205 kg (wet weight)
Front Suspension	Upside-down telescopic fork, adjustable compression and rebound damping