Index Data Technology Repairs Car care Controls Overview
73n
Cruise control
To interrupt the cruise control
When the system is activated, press
and hold button 4. The indicator lamp
stays on. You can use the cruise control
again as required.
In addition, the system is also automati-
cally deactivated in response to the fol-
lowing conditions:
> When you apply pressure to the
brake pedal.
> When you move the automatic trans-
mission selector lever from "Drive" to
"Neutral".
> If you exceed or fall below the pro-
grammed speed for an extended pe-
riod (by depressing the accelerator,
for example).
To resume the stored setting
Press button 3:
The vehicle accelerates to and main-
tains the last speed stored. When you
turn the ignition key to position 0, the
stored speed is deleted and the system
is deactivated.
To deactivate the system
When the cruise control has been can-
celed, press button 4 again. The indica-
tor lamp goes off and the stored speed
is canceled.
Do not use cruise control on
twisting roads, when high traffic
density prevents driving at a constant
speed, when the road surface is slick
(snow, rain, ice), or when the road sur-
face is loose (rocks or gravel, sand).<
To Next Page
Loading...
