ADJUSTMENT INSTRUCTIONS
10
Any questions please email to bolangfitness@outlook.com
To adjust the seat, pull out ROUND HEAD BOLT(E6), position the vertical seat post for the desired
height so that holes are aligned, then push ROUND HEAD BOLT(E6) into the hole.
To adjust the back, slacken the spring knob(E7) and secondary knob and pull both knobs back. Slide
the handlebar post along the housing on the main frame to the desired height, and with the holes
aligned correctly, tighten the spring adjusting knob and then the secondary knob.
E7
E7
To Next Page
Loading...