7
Any questions please email to bolangfitness@outlook.com
STEP 2:
a.Attach FRONT STABILIZER(B1)to MAINFRAME(A) using 3pcs of HEXAGON BOLT
M8x16 (E1), 2pcs of CURVED WASHER Φ8(E3) and 1pcs of FLAT WASHER Φ8(E2).
b.Repeat step a. to install REAR STABILIZER(B2) to MAINFRAME(A1) using 3pcs of
HEXAGON BOLT M8x16 (E1), 2pcs of CURVED WASHER Φ8(E3) and 1pcs of FLAT
WASHER Φ8(E2).
c.Lever the machine,
The user can tighten or loose 4*LEVER FOOT(B3) to level the machine if needed.
Tighten 4*LEVEL FOOT（B3) to make the machine stable before starting work out.
E1*3 E2*1 E3*2
*2
B3
E2
E2
E3
E3
E1
E1
E1
E1
To Next Page
Loading...