12
Attaching Infant Car
Seat Receivers
Removing Infant Car
Seat Receivers
•Lock the parking brake.
•Align the receivers with the
inside frame mounts of the
stroller. Adapters are labeled
Left and Right (child’s left
and right from the seated
position).
•Squeeze the button on the
receiver and lift upward.
•Push down until a click is
heard.
IMPORTANT: Verify receiver is
locked by pulling the receiver up.
Infant Car Seat Mode
WARNING!
When using an Infant Car Seat:
All infant car seats MUST be installed rear facing
To Next Page
Loading...
