13
Infant Car Seat Mode
Removing a Britax
Infant Car Seat
Attaching a Britax
Infant Car Seat
•Set the parking brake.
•Press the Click & Go release
buttons on each side.
NOTE: When removing the Infant
Car Seat from stroller, take care
that the car seat does not tip and
fall.
•Set the parking brake.
•Line up the adapter on the
Infant Car Seat with the
receivers on the stroller.
NOTE: For non-Britax Infant Car
Seats, an adapter frame must be
used (sold separately).
•Lift the Infant Car Seat
upward.
•Push down until locked into
place.
•Lift up on the Infant Car Seat
to ensure that it is secure.
To Next Page
Loading...
