Bobcat 741 - Page 44

HYDRAULIC CONTROL VALVE (Gresen) (Cont'd)
Lift Section (Cont'd)
Using a wire hooked on the end remove the ball seat [A].
Using a magnet remove the spri
ng and poppet from inside
the
lift section.
Remove and discard the
O-r ing from the anti-cavitation
valve [8).
Check the anti-cavitation parts for wear [C).
Put grease in the anti-cavitation seat. Install the ball on D
the seat [0].
Install and tighten the anti-cavitation valve in the lift
section.
-2-13-
8-04970
8-04975
6-05047
741, 742, 743, 7430S Bobcat Loader
Service Manual