Bobcat s250 - Hydraulic Controls (Continued); Advanced Control System (ACS) Operation

S250 Bobcat Loader
OI-17 Operation & Maintenance Manual
HYDRAULIC CONTROLS (CONT’D)
Advanced Control System (ACS) in HAND Control
Mode
Figure OI-25
Lift Arm Operation - (Left Hand Lever)
Move the lever outward (Item 1) [Figure OI-25] to
raise the lift arms.
Move the lever inward (Item 2) [Figure OI-25] to
lower the lift arms.
Lift Arm Float Position - (Left Hand Lever)
Press and hold the Float Button (Item 3)
[Figure OI-25] while the lever is in neutral. Move the
lever to lift arm down position (Item 2) [Figure OI-25],
then release the button.
Press Float Button again or move the lever to lift arm
up position (Item 3) [Figure OI-25].
Use the float position of the lift arms to level loose
material while driving backward.
Figure OI-26
Tilt Operation - (Right Hand Lever)
Move the lever inward (Item 1) [Figure OI-26] to tilt
the bucket backward.
Move the lever outward (Item 2) [Figure OI-26] to tilt
the bucket forward.
B-16247
B-15781
1
2
3
B-16246
B-15781
2
1