S250 Bobcat Loader
OI-25 Operation & Maintenance Manual
PRE-STARTING PROCEDURES
Before Starting The Engine
Figure OI-42
Use the bucket or attachment steps, grab handles and
safety treads (on the loader lift arms and frame) to get on
and off the loader [Figure OI-42]. Do not jump.
Safety treads are installed on the Bobcat loader to
provide a slip resistant surface for getting on and off the
loader.
Keep safety treads clean and replace when damaged.
Replacement treads are available from your Bobcat
dealer.
Read and understand the Operation & Maintenance
Manual and the Operator’s Handbook (Item 1)
[Figure OI-42] before operating the loader.
The Operation & Maintenance Manual and other manuals
can be kept in a container (Item 2) [Figure OI-42]
provided behind the operator seat.
WARNING
Instructions are necessary before operating or
servicing machine. Read and understand the
Operation & Maintenance Manual, Operator’s
Handbook and signs (decals) on machine. Follow
warnings and instructions in the manuals when
making repairs, adjustments or servicing. Check for
correct function after adjustments, repairs or
service. Untrained operators and failure to follow
instructions can cause injury or death.
W-2003-0903
Figure OI-43
Release the seat lever (Item 1) [Figure OI-43] and adjust
the seat position for comfortable operation of the loader
controls.
Figure OI-44
Suspension Seat - (Option & Loaders with 2-Speed)
Release the lever (Item 1) [Figure OI-44] to adjust the
seat distance from the levers and footrests.
Release the lever (Item 2) [Figure OI-44] to adjust the
angle of the seat back.
Turn the lever (Item 3) [Figure OI-44] to adjust the seat
cushion for weight of the operator.
N-20299
2
1
P-34036
2
N-20299
1
P-13907
1
P-16052
1
2
3
To Next Page
Loading...