Bobcat S650 - Page 90

88 S650 Operation & Maintenance Manual
PRE-STARTING PROCEDURE
Entering The Loader
Figure 99
Use the bucket or attachment steps, grab handles and
safety treads (on the loader lift arms and frame) to get on
and off the loader [Figure 99]. Do not jump.
Safety treads are installed on the Bobcat loader to
provide a slip resistant surface for getting on and off the
loader.
Keep safety treads clean and replace when damaged.
Replacement treads are available from your Bobcat
dealer.
Operation & Maintenance Manual And Operator’s
Handbook Locations
Figure 100
Read and understand the Operation & Maintenance
Manual and the Operator’s Handbook (Item 1)
[Figure 100] before operating the loader.
The Operation & Maintenance Manual and other
manuals can be kept in a container (Item 2) [Figure 100]
provided behind the operator seat.
WARNING
AVOID INJURY OR DEATH
Instructions are necessary before operating or
servicing machine. Read and understand the
Operation & Maintenance Manual, Operator’s
Handbook and signs (decals) on machine. Follow
warnings and instructions in the manuals when
making repairs, adjustments or servicing. Check for
correct function after adjustments, repairs or
service. Untrained operators and failure to follow
instructions can cause injury or death.
W-2003-0807
N-20299
2
1
P-90562C
P-90526A
1
2