Part 8 Troubleshooting
Q: Can' t turn on or camera crashes, no
response to keystrokes?
A: I. Please charge it for a least half an hour then
turn it on.
2. Pressthe Reset button once, then restart.
Q: Black screen appears after powering on.
A: I. The screen may enter the power-saving mode
after pushing the return button mistakenly.
Press any button again to light up the screen
display;
2. Press the Reset button once then restart the
camera.
3. Check whether the "LCD Off' is turn on in the
menu,
If you want the display is always on, please enter
the menu to set "LCDOff' option to Off. "LCD
Off' option can be set to off/ 1 min/2 min/3min/
5 min/10min.
4. Ifthe issue remains, maybe the display screen is
defective, contact after-sale for service.
20
To Next Page
Loading...
