2.4 Video Recording
Method 1:
In the power-off state, slide up the video record
power on the device and start
video recording, the blue indicator flashes. Then
push the button down to a middle
to save the current file and stop video recording.
The blue indicator goes off and the interface turns
to the video just recorded.
Method 2:
In the standby preview interface, slide the video
button up (Ill:ZlIDto start video recording, the blue
indicator flashes. While recording, push the button
down to a middle position to save the curr-
ent file and stop video recording. The blue indi-
cator goes off and the interface turns to the video
just recorded.
06
To Next Page
Loading...
