bObsweep bObi Classic - Edge Sensors: Er 01

Quick Start
Troubleshooting
Troubleshooting: Edge Sensors
Edge Sensors: Er 01
Parts You’ll Need: Cloth
(not included)
What to do:
Wipe the edge sensors with a soft cloth
slightly dampened with cold water or alcohol.
If problems persist, deactivate the edge
sensors using bObi’s blindfold stickers.
1.
2.
When the edge sensors
are deactivated, bObi is
unable to detect stairs
or sharp drops. You
may use blOck* to keep
her away from these
obstacles.
* Available to purchase separately.
7069