Quick Start
Troubleshooting
Troubleshooting: Dustbin
Dustbin: Er 05
Parts You’ll Need: Cleaning Tool Compressed Air
(not included)
What to do:
Remove bObi’s dustbin and empty it.
Gently wipe the two metal connectors on the
bottom of the dustbin with a dry cloth. If the
two metal connectors seem damaged, they
may need to be replaced.
Lastly, clean the metal contact points
inside bObi where the dustbin is
inserted. If one or both of the contact
points are stuck, use a screwdriver to
gently pull them out.
Carefully reinstall the dustbin while
bObi is in the upright position, so
that the dustbin securely locks.
1.
2.
3.
4.
8483
To Next Page
Loading...
