Charging Bob
Self-Charging
bObsweep is smart and will automatically search for his charging station when his
battery falls below 15%.
You may also direct bObsweep to the charging station anytime by pushing the
‘Charge’ button on the remote.
If you press any button while Bob is looking for his charging station, he will stop
searching and will enter standby.
Manual Charging
On the charging station:
Place bObsweep directly onto the plugged-in charging station. Make sure the pow-
er button on Bob’s side is turned ‘On’ and his charging plates sit directly on top of
the station. You will know bObsweep is charging when you see the battery bars
ashing on the cover screen.
Using the adapter:
Plug bObsweep directly using his adapter. His power inlet is on the side of his body
above the ‘On/O’ button.
To Next Page
Loading...
