EasyManua.ls Logo

BOCK Zephyr EXL - User Manual

BOCK Zephyr EXL
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Quick Start
1
Technical Support: 814-777-3890
© 2022 Bock Industries, Incorporated.
All Rights Reserved.
Operation 1/2
1. Operator & bystander safety is your 1
st
priority!
Wear safety glasses and always point the
Zephyr in a safe direction.
2. Zephyr Components & Specifications
Energy = 28 Joules
Bolt Velocity = 27 m/s
Mass = 1.1 kg
EXL
Adapter
Bolt Head
(retracted, not shown)
Guide
Trigger
Safety Lever
- Up is SAFE (shown)
- Down is FIRE
Safety Pin Hole
(shown in safe location)
Pneumatic
Fitting
(125-130 psi)
Storage: push safety pin thru hole
Complies with the requirement of The Protection of Animals at the Time of Killing
(Amendment) (England) Regulations 2022 (Legislation.gov.uk) for piglets under 10 kg.
(example)
Video Training
bock-industries.com
Question and Answer IconNeed help?

Do you have a question about the BOCK Zephyr EXL and is the answer not in the manual?

Summary

Operator and Bystander Safety

Zephyr Components and Specifications

Details on the energy, bolt velocity, and mass of the Zephyr device.

Engaging Zephyr Safeties and Connecting Air Compressor

Engage Zephyr Safeties

Instructions on inserting the safety pin and turning the safety lever.

Connect Zephyr to Air Compressor

Guidance on connecting the Zephyr to an air compressor at 125-130psi.

Legislation Requirements

Specific Requirements for Non-Penetrating Bolt Use

Details specific parameters for non-penetrative captive bolt use on piglets.

General Requirements for Non-Penetrating Bolt Use

Outlines general legislative requirements for captive bolt use on various animals.

Targeting and Firing Sequence

Disengage Zephyr Safety Measures

Steps to remove safety pin, set lever to firing position, and test operation.

Targeting the Piglet

Procedure for supporting the piglet's head and locating the target area.

Firing Sequence

Instructions for pressing the adapter and squeezing the trigger for firing.

Zephyr Maintenance and Cleaning

Daily Cleaning and Maintenance

Steps for daily cleaning, exposing, cleaning, and reassembling the bolt and adapter.

Cleaning for Biosecurity

Detailed procedure for cleaning the animal contact area for biosecurity.

Bolt End Replacement

Review How-To Video and Component Locations

Guidance to review instructional video and identify Zephyr components.

Disassemble for Bolt Replacement

Steps to disconnect, remove adapter, and descend the bolt.

Replace Bolt Head

Instructions for removing old bolt head, assembling new one with washers and Loctite.

Summary

Operator and Bystander Safety

Zephyr Components and Specifications

Details on the energy, bolt velocity, and mass of the Zephyr device.

Engaging Zephyr Safeties and Connecting Air Compressor

Engage Zephyr Safeties

Instructions on inserting the safety pin and turning the safety lever.

Connect Zephyr to Air Compressor

Guidance on connecting the Zephyr to an air compressor at 125-130psi.

Legislation Requirements

Specific Requirements for Non-Penetrating Bolt Use

Details specific parameters for non-penetrative captive bolt use on piglets.

General Requirements for Non-Penetrating Bolt Use

Outlines general legislative requirements for captive bolt use on various animals.

Targeting and Firing Sequence

Disengage Zephyr Safety Measures

Steps to remove safety pin, set lever to firing position, and test operation.

Targeting the Piglet

Procedure for supporting the piglet's head and locating the target area.

Firing Sequence

Instructions for pressing the adapter and squeezing the trigger for firing.

Zephyr Maintenance and Cleaning

Daily Cleaning and Maintenance

Steps for daily cleaning, exposing, cleaning, and reassembling the bolt and adapter.

Cleaning for Biosecurity

Detailed procedure for cleaning the animal contact area for biosecurity.

Bolt End Replacement

Review How-To Video and Component Locations

Guidance to review instructional video and identify Zephyr components.

Disassemble for Bolt Replacement

Steps to disconnect, remove adapter, and descend the bolt.

Replace Bolt Head

Instructions for removing old bolt head, assembling new one with washers and Loctite.

BOCK Zephyr EXL Specifications

General IconGeneral
BrandBOCK
ModelZephyr EXL
CategoryFarm Equipment
LanguageEnglish