BOCK Zephyr EXL - Targeting and Firing Sequence; Disengage Zephyr Safety Measures; Targeting the Piglet; Firing Sequence

Quick Start
5
Technical Support: 814-777-3890
© 2022 Bock Industries, Incorporated.
All Rights Reserved.
1. Disengage Zephyr Safety measures:
1.1 Remove SAFETY PIN and store it as shown (page 1).
1.2 Turn SAFETY LEVER “down” to firing position.
1.3 Point the Zephyr in a safe direction (down) and
squeeze the trigger 2X to confirm proper operation.
3. Firing Sequence:
3.1 In one motion: Press the ADAPTER firmly on target and
immediately squeeze trigger.
3.2 Confirm physical signs of insensibility & death.
2. Targeting:
2.1 Support the piglet’s head against a solid surface. Use
Bock Industries piglet restraint if available.
2.2 Locate target: Top center of head, between eyes & ears.
Targeting 1/1
EXL
Video Training
bock-industries.com