EasyManua.ls Logo

Bodi-Tek BT-VIBP2 - Important Product Information; Electrical Safety & Precautions; Technical Specifications

Bodi-Tek BT-VIBP2
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 3 Page 4
Important
If the supply cord is damaged, it must be replaced by the manufacturer
or its service agent. If not replaced then use of the Vibration Training Gym
should be discontinued or returned to the manufacturer for disposal or
recycling.
This product is fitted with a BS1363 plug, fused at 5 amps. If it
is necessary to replace the fuse only a 5 amp fuse must be used.
Precautions
Keep your unit out of reach of children.
Always use on a at surface, and allow 1 metre of clear space around the
product.
Protect carpet by placing the unit on a mat.
Do not use for more than 20 minutes at a time.
Choose a speed which best ts your physical strength/exibility level.
Consult with your doctor if necessary.
Wear appropriate clothing when exercising.
Be careful to maintain your balance while using, mounting and
dismounting the Vibration Training Gym.
Never leave unattended when unit is plugged in. Unplug while
assembling, after use and before cleaning.
Keep away from water.
Should any irritation occur on or around the feet, discontinue use and
contact Bodi-Tek or your GP.
We recommend consulting your GP prior to use if you are pregnant or
suffer from any of the following conditions: acute thrombosis, acute
varicose veins, diabetes, epilepsy, or if you have recently had hip or knee
surgery including cardiac surgery or have a pacemaker.
Cleaning
ALWAYS unplug the unit before cleaning.
Clean unit with a slightly damp cloth.
Do NOT clean with solvents or abrasives.
Do NOT immerse in water.
Technical Specifications
Weight 16.6 kg
Dimensions 780mm x 430mm x 140mm
Programmes 5
Speed 1–99
Manual programme times 1-20 mins
Preset programme times 1-10 mins
Max. user weight 120kgs (265 lbs)
Power Input
Input AC220 - 240V ~ 50Hz, 200W
Environment
Temperature Operating 0 to 35 degrees Celsius
Storage -20 to 50 degrees Celsius
Humidity Operating 10% to 80% RH
Storage 5% to 90% RH
This product is not a medical device.
Copyright The Dezac Group Ltd 2016

Related product manuals