Bodum 11744 ePEBO - Maintenance and Care

Vacuum Coee Maker
13
MAINTENANCE
AND CARE
De-Scaling The Vacuum Coee Maker
To guarantee that the Vacuum Coee Maker works correctly,
you have to ensure that the machine is kept free of lime-
scale. The optimum cycle is dependent on the hardness of
the water which diers from country to country. We would
advise de-scaling the machine after every 100 uses.
Important: If you do not de-scale the Vacuum Coee Maker
then this can cause damage!
Regular de-scaling can increase the service life of the prod-
uct and guarantees its faultless operation. Furthermore,
regular de-scaling will result in less steam forming, faster
brewing times and energy savings.
Deposits should be removed with a commercially available
de-scaling solution for coee machines or with a solution
of vinegar and water (20% vinegar and 80% water). When
using commercially available de-scaling solutions ensure
that these are suitable for use with heating elements made
of copper as well as silicone materials. (Carefully check the
speciications and dosage instructions of the manufacturer).
Fill the jug (11) with descaling solution or a vinegar and water solu-
tion (do not ill above the MAX line (13)) and leave it for a while.
Then rinse the jug thoroughly with cold, clear water, at least
twice.
Any other servicing should be performed by an authorized
service facility.
STORAGE
Always disconnect the Vacuum Coee Maker from the mains
when it is not in use.
Clean the Vacuum Coee Maker after every use. The follow-
ing parts are dishwasher safe:
1 Funnel Lid 4 Funnel Gasket
2 Filter 12 Measuring Spoon
3 Funnel 15 Stirring spoon
Ensure that no ground coee remains in the ilter (2) before
putting it in the dishwasher.
Wash the jug under warm, clear running water. Then scrub the
inside of the jug with a soaped kitchen brush. Rinse it well.