5. Install the Handlebar
Fit the Pulse sensor wires (24) through the hole of Handlebar post (4), and then pull out from the top of the Handlebar
post (4).
Fix the Handlebar (5) onto the Handlebar post (4) with Spring washer (25), Flat washer (33) and Bolt (26). Cover the
Handlebar chuck cover (27) onto the Handlebar (4).
6. Install the computer
Pull the Pulse sensor wires (24) and Connective wire (18) through the hole of Computer bracket (30) and then fit the
bracket(30) onto the Handlebar post(4). Connect the Pulse sensor wires (24) and Connective wire (18) to the wires that
come from the Computer (8), and then attach the Computer (8) to the Computer bracket (30).
To Next Page
Loading...