body Power BUB350 - Assembly STEP 2

BUB350/BUB375 Page 6
Assembly STEP 2
Attach Rear Bottom Tube (#03) to the Main Frame (#02),
secure them together by using two Hex Bolt (#13),
two Washers (#19), two Washers (#20) and
two Nylon Nuts (#17).
Hardware Required
#17
Nylon Nut (M10)
[2 Pieces]
#13
Hex Bolt (M10x80 mm)
[2 Pieces]
#19
Washer (Ø10.5xØ25)
[2 Pieces]
#20
Washer (Ø10.5xØ14)
[2 Pieces]