15
STEP
NOTE 1
Check Jam Nut (104)
weekly to be sure it is
tight and locked onto
the Selector Rod (19).
Selector Rod Top Bolt (103) must be
threaded a minimum of 1/2” into the
Selector Rod (19), and Jam Nut (104)
tightened securely against spring lock
washer (105) to ensure proper connection.
WARNING
!
!
39
Loosen
Loosen
Turn and loosen Rubber Stop (105)
to take up space and tighten cable.
Turn and loosen Rubber Stop (98)
to take up space and tighten cable.
To Next Page
Loading...
