BodyCraft ECT-2100 - Page 9

Step 7
Step 8
8
H1
28
28
4
93
G1
44
4
93
G2
4
45
G3
Insert the Power Cord (41) into the barrel plug on the back side of Elliptical Crosstrainer. Then
insert the Plug end into the wall outlet. The console should light up. If not, re-check plug and wall
connections and make sure the wall outlet has power.
Attach the Bottle Holder (44) to the Front Upright (4) using two M5 X 10mm Dome Bolts (93).
41
H1